Diy Vr Goggles

To make DIY VR goggles, you will need:

• Cardboard box
• Scissors
• Glue gun
• Velcro strips
• Biconvex lenses (can be found from old binoculars or online)
• Smartphone

Instructions:

1. Cut out a piece of cardboard that is large enough to fit your smartphone inside.
2. Cut two holes in the cardboard, one for each lens. The holes should be slightly smaller than the lenses themselves.
3. Glue the lenses into the holes.
4. Cut out a small piece of cardboard to cover the nose bridge. This will help to prevent light from leaking in.
5. Glue the nose bridge into place.
6. Cut two straps out of cardboard and glue them to the sides of the goggles.
7. Attach the Velcro strips to the straps and the goggles.
8. Place your smartphone inside the goggles and adjust the straps so that the goggles fit comfortably.
9. Enjoy your DIY VR experience!

Tips:

• For a better fit, you can use a foam or rubber gasket around the eyeholes.
• You can also add a headband to the goggles to help keep them in place.
• There are many different VR apps available for download, so be sure to check them out.