Diy Wax Seal Stamp

To make a DIY wax seal stamp, you will need:

• Sculpey clay
• Wax
• Glue gun
• Mold release spray
• Candle or spoon
• Paper
• Optional: handle material (cork, wood, etc.)

Instructions:

1. Warm up the clay in your hands and shape it into the desired design for your stamp.
2. If you want to add a handle, attach it to the back of the stamp using hot glue.
3. Bake the clay according to the package directions.
4. Once the clay is cool, apply a thin layer of mold release spray to the top of the stamp.
5. Melt the wax using a candle or spoon.
6. Pour a small amount of wax onto the paper.
7. Carefully press the stamp into the wax and hold it for a few seconds.
8. Allow the wax to cool completely before removing the stamp.

Once your stamp is dry, you can use it to seal envelopes, invitations, and other stationery items. Simply melt some wax and pour it onto the paper where you want to place the seal. Then, press the stamp into the wax and hold it for a few seconds. Allow the wax to cool completely before removing the stamp.

Here are some tips for making DIY wax seal stamps:

• Use a toothpick or other sharp object to carve detailed designs into the clay.
• If you are using a hot glue gun, be careful not to overdo it, or the glue will melt the clay.
• Make sure to use enough wax so that the seal is thick enough, but not so much that it is difficult to remove the stamp.
• If you are making a lot of seals, you may want to invest in a wax seal melting pot. This will make it easier to melt the wax and create consistent seals.

Have fun and be creative!