A DIY tennis ball launcher is a simple device that can be used to launch tennis balls over a long distance. It is typically made from PVC pipe, a spring, and a release mechanism. The launcher can be powered by a variety of sources, such as a hand pump, a battery-powered motor, or even a compressed air tank.
To make a DIY tennis ball launcher, you will need the following materials:
- PVC pipe (1 inch diameter)
- PVC elbows (45 degrees)
- PVC tees
- PVC end caps
- A spring (approximately 2 inches in diameter and 6 inches long)
- A release mechanism (such as a trigger or a button)
- A power source (optional)
Once you have gathered your materials, you can begin assembling the launcher. Start by cutting the PVC pipe into the following lengths:
- 2 x 12 inches
- 1 x 24 inches
Next, connect the PVC pipe pieces together using the elbows and tees. The launcher should have the following shape:
/---\ / \ / \ / \ / \ / \ / \
The spring should be placed inside the longer PVC pipe, with one end resting on the bottom of the pipe and the other end resting on the release mechanism. The release mechanism should be attached to the shorter PVC pipe.
If you are using a power source, you will need to attach it to the launcher at this point. For example, if you are using a battery-powered motor, you would attach it to the shorter PVC pipe and connect it to the release mechanism.
Once the launcher is assembled, you are ready to start launching tennis balls. Simply load a tennis ball into the launcher and press the release mechanism. The spring will launch the tennis ball a long distance.
Here are some additional tips for making a DIY tennis ball launcher:
- Use a strong spring to ensure that the tennis ball is launched a long distance.
- Make sure that the release mechanism is secure and will not accidentally release the tennis ball.
- If you are using a power source, make sure that it is powerful enough to launch the tennis ball a long distance.
- Be careful when launching tennis balls, as they can travel at high speeds and cause injury.
Have fun!
Tennis Ball Launcher Diy – Tennis ball machine DIY – part 2 – YouTube
How to Make a Ball Launcher : 38 Steps (with Pictures) – Instructables
Tennis Ball Launcher Diy – Tennis ball machine DIY – part 2 – YouTube
2014-06-06 (F) Tennis Ball Launcher
DIY Electric Ball Launcher | #DIY – YouTube
Tennis Ball Launcher Diy : Physics Students Test Tennis Ball Launchers
Tennis Ball Launcher : 21 Steps (with Pictures) – Instructables
Diy Ball Launcher Simple – DIY Craft
Do It Yourself Tennis Ball Launcher – Diy Online
Tennis Ball Launcher Diy – Tennis ball machine DIY – part 2 – YouTube
DIY TENNIS BALL LAUNCHER – YouTube
Tennis Ball Launcher Diy : Physics Students Test Tennis Ball Launchers
DIY ball launcher built with Makeblock – YouTube
Tennis Ball Launcher Diy – DC Electric motor 3v 6v DIY ping pong ball
TENNIS BALL CANNON : 11 Steps – Instructables
Tennis Ball Launcher Diy – Tennis ball machine DIY – part 2 – YouTube
air powered tennis ball launcher homemade – YouTube
SIUE IME Project Page: Tennis Ball Launcher
Tennis Ball Launcher Diy – DC Electric motor 3v 6v DIY ping pong ball