Diy Spreader Bar

A DIY spreader bar is a simple device that can be used to improve the performance of your fishing rig. It is easy to make, and can be customized to meet your specific needs.

To make a DIY spreader bar, you will need:

• Two pieces of sturdy tubing, such as PVC or aluminum
• A length of stainless steel wire
• Crimps or sleeves to attach the wire to the tubing
• A drill with a bit that is slightly larger than the diameter of the wire

Instructions:

1. Drill two holes in each end of the tubing, spaced about 6 inches apart.
2. Cut the wire to the desired length, leaving enough extra wire at each end to form a loop.
3. Thread the wire through the holes in the tubing, and crimp or sleeve the ends of the wire to secure it.
4. Attach your lures or baits to the spreader bar using leader material.

To use the spreader bar, simply attach it to your fishing line and troll it behind your boat. The spreader bar will help to keep your lures and baits spread out, which will increase your chances of catching fish.

Here are some tips for making and using a DIY spreader bar:

• Make sure to use sturdy tubing that can withstand the weight of your lures and baits.
• Use stainless steel wire to prevent rust and corrosion.
• Crimp or sleeve the ends of the wire securely to prevent them from coming loose.
• Attach your lures and baits to the spreader bar using leader material to help prevent them from getting tangled.
• Experiment with different lure and bait combinations to find what works best for the fish you are targeting.

With a little creativity, you can easily make a DIY spreader bar that will help you to catch more fish.