Diy Pool Vacuum

To make a DIY pool vacuum, you will need a garden hose, a funnel, a vacuum head, a hose adapter, duct tape, and a broomstick.

1. Attach the funnel to the skimmer mouth.
2. Connect the garden hose to the funnel using the hose adapter.
3. Tape the connection between the hose and the funnel to secure it.
4. Connect the vacuum head to the other end of the garden hose.
5. Tape the broomstick to the vacuum head and hose to help the head connection stay in place.

Once the vacuum is assembled, you can start cleaning your pool. Simply turn on the garden hose and start vacuuming. The water will flow through the hose, through the vacuum head, and into the skimmer. The vacuum head will collect dirt, leaves, and other debris from the bottom of your pool.

Be sure to empty the skimmer basket regularly to prevent the pool vacuum from clogging. You can also use a pool filter cleaner to help keep the vacuum head clean.

Tips:

• Use a garden hose with a high flow rate for best results.
• Be careful not to over-vacuum your pool, as this can damage the pool liner.
• If you have a lot of debris in your pool, you may need to empty the skimmer basket more often.
• Use a pool filter cleaner to help keep the vacuum head clean.