Diy Car Ramps

DIY car ramps are a simple and inexpensive way to raise your car so you can work on it underneath. They can be made from wood or metal, and there are many different designs available online and in books.

To make wooden car ramps, you will need two pieces of lumber, such as 2x8s or 2x10s. The length of the lumber will depend on the height of your car and the angle of the ramps. A good rule of thumb is to make the ramps at least 24 inches long and 12 inches high.

Once you have the lumber, cut it to length and then screw the two pieces together to form a ramp. You can use wood glue to strengthen the joint, but be sure to clamp the pieces together while the glue dries.

To make the ramps more stable, you can attach a piece of plywood to the bottom of each ramp. This will help to prevent the ramps from slipping on the ground.

Once the ramps are built, you can place them in front of your car and drive up onto them. Be sure to chock the wheels of your car to prevent it from rolling off the ramps.

DIY car ramps are a great way to save money on car maintenance and repairs. They are also easy to make and use.

Diy Wood Car Ramps : 10 Inexpensive Diy Car Ramps You Can Build With