Diy Cabinet Refacing

DIY cabinet refacing is a budget-friendly way to update your kitchen cabinets without replacing them entirely. It involves removing the old doors and drawer fronts, and then covering the cabinet faces with a new material, such as wood veneer or laminate. You can also replace the hardware with new pieces to complete the new look.

To reface cabinets yourself, you will need the following materials:

• New cabinet doors and drawer fronts
• Wood veneer or laminate
• Contact cement
• Utility knife
• Sandpaper
• Measuring tape
• Level
• Drill
• Screws
• New cabinet hardware

Instructions:

1. Remove the cabinet doors and drawer fronts.
2. Clean and sand the cabinet faces.
3. Apply contact cement to the back of the new wood veneer or laminate and to the front of the cabinet faces.
4. Carefully press the wood veneer or laminate onto the cabinet faces, smoothing out any air bubbles as you go.
5. Trim any excess wood veneer or laminate with a utility knife.
6. Reattach the cabinet doors and drawer fronts.
7. Replace the cabinet hardware.

DIY cabinet refacing is a relatively easy project, but it does require some time and patience. With careful planning and execution, you can give your kitchen cabinets a whole new look for a fraction of the cost of replacing them.