Diy Pool Resurfacing

To resurface a pool yourself, you will need to clean the pool thoroughly, etch the surface to remove old plaster or paint, and then apply a new surface material. The most common types of pool resurfacing materials are epoxy paint and resurfacing plaster. Epoxy paint is a relatively easy DIY project, but it requires careful preparation and proper application. Resurfacing plaster is a more difficult project, but it will last longer than epoxy paint.

Here are the basic steps for resurfacing a pool with epoxy paint:

1. Clean the pool thoroughly, removing all debris and algae.
2. Etch the pool surface with muriatic acid. This will remove any remaining plaster or paint and create a rough surface for the new epoxy to adhere to.
3. Rinse the pool thoroughly with water to remove all traces of acid.
4. Apply a primer to the pool surface. This will help the epoxy to bond better.
5. Apply two coats of epoxy paint to the pool surface. Allow each coat to dry completely before applying the next.
6. Once the epoxy has cured, fill the pool with water and enjoy!

Here are the basic steps for resurfacing a pool with plaster:

1. Drain the pool and let it dry completely.
2. Remove any old plaster or paint from the pool surface. This can be done with a chisel, hammer, or power washer.
3. Etch the pool surface with muriatic acid. This will create a rough surface for the new plaster to adhere to.
4. Rinse the pool thoroughly with water to remove all traces of acid.
5. Apply a bonding coat to the pool surface. This will help the plaster to bond better.
6. Apply two coats of plaster to the pool surface. Allow each coat to dry completely before applying the next.
7. Once the plaster has cured, fill the pool with water and enjoy!

If you are not comfortable resurfacing your pool yourself, you can always hire a professional pool contractor.