Diy Stylus Pen

To make a DIY stylus pen, you will need:

• A pen with a removable ink cartridge
• A cotton swab or cotton wool
• Aluminum foil
• Tape

Instructions:

1. Remove the ink cartridge from the pen.
2. If the pen is not metal, wrap the casing in aluminum foil and secure it with tape.
3. Tear off a small piece of cotton wool and feed it through the pen nib hole.
4. With the cotton wool poking through the hole, push the ink cartridge back into the tip of the pen. This will help to secure the cotton wool.
5. You may need to experiment with the amount of cotton wool you are using. Too much and you will not be able to push the nib back in, too little and the pen nib will not be covered and will break through the cotton wool.
6. Once the pen nib is covered and secure, you can use your stylus to operate your touchscreen device.

Here is a simpler version:

1. Take a pen and remove the ink cartridge.
2. Wrap the pen in aluminum foil and secure it with tape.
3. Cut off a small piece of cotton wool and stick it to the tip of the pen with tape.
4. You can now use your stylus to operate your touchscreen device.

Enjoy!