Diy Picture Hanger

To make a DIY picture hanger, you will need:

• Scrap wood (or any other sturdy material)
• Saw
• Drill
• Measuring tape
• Pencil
• Screws or nails
• Wire or ribbon

Instructions:

1. Cut two pieces of wood to the desired length of your picture hanger.
2. Drill a hole in the center of each piece of wood.
3. Thread a wire or ribbon through the holes and tie it securely.
4. Screw or nail the two pieces of wood together, sandwiching the wire or ribbon in between.
5. Attach the picture hanger to the back of your picture using screws or nails.

To hang your picture, simply attach the wire or ribbon to a nail or hook on the wall.

Here is a simpler version:

DIY Picture Hanger

Materials:

• Scrap wood (or any other sturdy material)
• Wire or ribbon

Instructions:

1. Cut a piece of wood to the desired length of your picture hanger.
2. Drill a hole in each end of the wood.
3. Thread a wire or ribbon through the holes and tie it securely.
4. Attach the picture hanger to the back of your picture using screws or nails.

To hang your picture, simply attach the wire or ribbon to a nail or hook on the wall.

Tips:

• If you are using scrap wood, make sure that it is smooth and free of splinters.
• You can use any type of wire or ribbon for your picture hanger. Just make sure that it is strong enough to support the weight of your picture.
• If you are hanging a heavy picture, you may want to use two or more picture hangers.
• To make sure that your picture is hanging level, use a level.

I hope this helps!