Diy Hurricane Shutters

DIY hurricane shutters are a temporary way to protect your windows and doors from hurricane damage. They are typically made of plywood and can be installed by homeowners with basic tools and skills.

To make DIY hurricane shutters, you will need:

• Plywood that is at least 5/8 inches thick
• Hardware, such as hinges, latches, and screws
• Tools, such as a saw, drill, and screwdriver

Once you have gathered your materials, you will need to measure your windows and doors to determine the size of your shutters. You should add at least 4 inches to the width and height of each window or door to allow for overlap.

Once you have your measurements, you can cut the plywood to size. Then, you will need to attach the hinges and latches to the shutters. Be sure to follow the manufacturer’s instructions for proper installation.

Once the shutters are assembled, you can install them on your windows and doors. You can use screws, nails, or hurricane clips to attach the shutters to your home.

When a hurricane is approaching, you should install your hurricane shutters to protect your windows and doors from damage. After the hurricane has passed, you can remove the shutters and store them until the next storm.

Here are some tips for installing DIY hurricane shutters:

• Be sure to measure your windows and doors carefully before cutting the plywood.
• Use hardware that is designed for hurricane shutters.
• Follow the manufacturer’s instructions for installing the shutters.
• Make sure that the shutters are securely attached to your home.

DIY hurricane shutters can be a cost-effective way to protect your home from hurricane damage. However, it is important to note that they may not provide the same level of protection as permanent hurricane shutters.